Analisis Faktor yang Mempengaruhi Standar Waktu Pelayanan Truck Round Time PT Terminal Peti Kemas Surabaya
DOI:
https://doi.org/10.55606/jubpi.v2i4.3296Keywords:
TRT, standard service time, container terminalAbstract
The aim of this research is to determine the performance of TRT from 2021 to 2023, identify the causes and impacts of TRT that exceeds the standard set time. The research design used is descriptive research with a mixed methods approach (qualitative )The type of data used is qualitative and quantitative data presented in numbers and sentences that support the author's opinion in analyzing this research. Data sources in this research are divided into primary data sources obtained from interviews, observations and literature studies and secondary data sources obtained from company data in the form of throughput data, TRT for 2021 to 2023, printed books, journals and the internet. The results of this research are that the TRT performance at PT Terminal Petikemas Surabaya is good because in 2021 to 2023 the dominant number of trucks at the TRT was less than 30 minutes, although there could be indications of a decline in performance. This decline in performance is indicated by an increase in the number of trucks from 2021 to 2023 on TRT of more than 30 minutes. The causes of TRT exceeding the standard determination time are density factors in the stacking yard, equipment factors (service and availability), human resource factors and natural factors. The negative impact of TRT that exceeds the standard set time is disruption of loading and unloading activities, internal company losses and decreased customer loyalty. Suggestions that can be used in overcoming TRT (Truck Round Time) problems are that good coordination is needed in accordance with Standard Operating Procedures (SOP), good improvisation from human resources, systems and equipment as well as yard planners carrying out various plan innovations by shortening slots so that RTG movements are not too displacement length.
References
Ayustina, T. M., Istijanto, S., Murti, F., & Pudjiastuti, T. (2019). Perancangan fasilitas pelabuhan industri di Kabupaten Gresik [Universitas 17 Agustus 1945]. http://repository.untag-sby.ac.id/1323
Babus, S. (2020). Pengaruh turn around time terhadap kecepatan membongkar muatan di terminal petikemas Semarang [Universitas Maritim Amni Semarang]. http://repository.unimar-amni.ac.id/3459
Betta, S. A. (2022). Strategi manajemen pelabuhan dengan mengkonsolidasikan terminal peti kemas untuk mengurangi waktu tunggu kapal (studi kasus di terminal peti kemas Makassar dan Makassar New Port) [Universitas Hasanuddin]. https://repository.unhas.ac.id/id/eprint/23692
Departemen Perhubungan. (2018). Standar kinerja pelayanan. Surabaya: Departemen Perhubungan.
Fandy, T. (2007). Stratergi pemasaran (2nd ed.). Andi Offset.
Fernanda, B. S. (2020). Pelaksanaan stuffing in dan stripping in di depo Prapat Kurung oleh PT. Mitra Dharma Laksana Surabaya [Universitas Maritim Amni Semarang]. http://repository.unimar-amni.ac.id/2398
Hakim, A. R., Rahwana, K. A., & Sutrisna, A. (2023). Pengaruh motivasi kerja dan budaya organisasi terhadap kepuasan kerja karyawan di Hotel Santika Kota Tasikmalaya. Jurnal Ekonomi, Manajemen Pariwisata dan Perhotelan, 2(1), 435–443. https://doi.org/10.55606/jempper.v2i1.1053
Helmia, H. D. (2020). Metode penelitian kualitatif dan kuantitatif. Pustaka Ilmu.
Hutapea, T. (2019). Analisis kinerja dan produktivitas bongkar muat peti kemas pada PT. Pelabuhan Indonesia I Cabang Belawan [Universitas HKBP Nommensen]. https://repository.uhn.ac.id/handle/123456789/2353
Jamal, A. (2017). Analyzing the benefit of implementing integrated DGPS and terminal operating system at yard terminal Surabaya. Jatit.
Karima, N. A. (2019). Analisis penetapan standar waktu pelayanan TRT (Truck Round Time) di PT Terminal Petikemas Surabaya [Universitas Sebelas Maret].
Liauw, J. K., Utami, D., & Pandapotan, D. (2018). Penerapan IPC Terminal Operating System dan layanan peti kemas Pelabuhan Tanjung Priok. Jurnal Manajemen Bisnis Transportasi dan Logistik, 4(3), 317–322. https://journal.itltrisakti.ac.id/index.php/jmbtl/article/view/826
Mahmudi. (2007). Manajemen kinerja sektor publik. UPP STIM YKPN.
Malisan, J. (2016). Potensi pengembangan Pelabuhan Tarakan untuk konsolidasi barang bagi wilayah Kalimantan Utara dan sekitarnya. Jurnal Penelitian Transportasi Laut, 18(2), 52–62. https://doi.org/10.25104/transla.v18i2.1386
Moleong, L. J. (2004). Metode penelitian kualitatif. Remaja Rosda Karya.
Permenhub. (2016). Peraturan Menteri Perhubungan Nomor 83 Tahun 2016 tentang Penyelenggaraan dan Pengusahaan Depo Peti Kemas. Jakarta: Kementerian Perhubungan.
Salim, A. (2016). Manajemen transportasi (12th ed.). Raja Grafindo Persada.
Setiawan, A. A. (2018). Metodologi penelitian kualitatif. Cv Jejak.
Sianipar. (2000). Perencanaan peningkatan kinerja, bahan diklat staf dan pimpinan tingkat pertama. Lembaga Administrasi Negara.
Sinambela. (2006). Reformasi pelayanan publik: Teori, kebijakan dan implementasi. Bumi Aksara.
Sitepu, G., & Sulistiana, O. (2023). Analisis perbandingan kinerja operasional terminal peti kemas Makassar dan Bitung. REPOSITORI, 1(1), 1–10. https://jurnal.pipmakassar.ac.id/index.php/rps/article/view/678
Situmorang, S. H. (2010). Analisis data untuk riset manajemen dan bisnis. Medan.
Soedjono, K. (2002). Perencanaan pelabuhan. Bandung: Institut Teknologi Bandung.
Subandi. (1993). Manajemen petikemas (2nd ed.). Arcan.
Sugiyono. (2017). Metodologi penelitian kuantitatif dan kualitatif dan R&D. Alfabeta.
Sutrisno, H. (1993). Metodologi research. Andi Offset.
Triatmojo, B. (2010). Perencanaan pelabuhan. Beta Offset.
UU RI. (2009). Undang-undang (UU) Nomor 25 Tahun 2009 tentang pelayanan publik. Jakarta: Pemerintah Pusat.
Yunus, A. R., Nugroho, F. X. A. P., & AS, R. P. P. (2022). Standar waktu pelayanan truck round time dalam meningkatkan kinerja receiving di PT. Terminal Peti Kemas Surabaya. Jurnal Aplikasi Pelayaran dan Kepelabuhanan, 12(2), 132–145. https://doi.org/10.30649/japk.v12i2.85
