ANALISIS KUALITAS PRODUK PENYAMAKAN KULIT DENGAN METODE SQC dan FMEA
Abstract
PT Adi Satria Abadi is a company engaged in tanning. The problem faced by the company is the presence of defective leather during the goat and sheep tanning production process. From these problems, the purpose of this study was to identify the level of product defects, analyze the factors that cause defects, and make recommendations for improvements to improve the quality of goat and sheep tanning products. Data processing in this study uses the SQC (Statistical Quality Control) and FMEA (Failure Mode and Effect Analysis) methods. Based on the identification results, it was found that there were 1,507 holes for holes, 1,066 for thick defects, 1,061 for louse defects, and 1,086 for size defects. The results of the SQC analysis still have uncontrolled data based on the control chart which is on size defects with a total of 1,086 defects, while for hollow defects, too thick defects, and tick defects are under control. The results of the FMEA analysis show that the order of completion with the first priority is spotting bugs with an RPN value of 36. The suggested improvements to the company are by directly selecting raw materials and supervising employees.
Keywords: Quality, Product Defects, Seven Tools, SQC, FMEA.
References
Asnan, M. H. I. N. (2019). Penerapan Six Sigma Untuk Minimalisasi Material Scrap Pada Warehouse Packaging Marsho PT. SMART Tbk. Surabaya. Performa: Media Ilmiah Teknik Industri, 18(1), 1–8. https://doi.org/10.20961/performa.18.1.21764
Berlyan, R., Kurniawan, W., & Sari, I. P. (2021). Usulan Perbaikan Kualitas Produk Topside Menggunakan Metode Fmea Di Pt. Xyz. Journal of Management : Small and Medium Enterprises (SMEs), 14(2), 189–203. https://doi.org/10.35508/jom.v14i2.4752
Case, F., On, S., & Xyz, C. V. (2022). Quality Analysis Of Bakery Products Using The Six Sigma Method And Failure Mode And Effect Analysis. 1(2), 59–72.
Ratnadi and E. Suprianto, “Pengendalian Kualitas Produksi Menggunakan Alat Bantu Statistik (Seven Tools) Dalam Upaya Menekan Tingkat Kerusakan Produk,” J. Indept, vol. 6, no. 2, p. 11, 2016.
R. Lesmana and S. D. Ayu, “Pengaruh Kualitas Produk Dan Citra Merek Terhadap Keputusan Pembelian Kosmetik Wardah Pt Paragon Tehnology And Innovation,” J. Pemasar. Kompetitif, vol. 2, no. 3, p. 59, Jul. 2019, doi: 10.32493/jpkpk.v2i3.2830.
Prastyo, Y., & Rimawan, E. (2018). Reduce Reject Painting Process Using Six Sigma Method with Dmaic Approach and Experiments on Brake Disc Products ( 1 Rc Hub ) ( Case Study in Pt . Xyz ). International Journal of Innovative Science and Research Technology, 3(10), 327–337.
Rahman, A., & Perdana, S. (2021). Analisis Perbaikan Kualitas Produk Carton Box di PT XYZ Dengan Metode DMAIC dan FMEA. Jurnal Optimasi Teknik Industri (JOTI), 3(1), 33–37. https://doi.org/10.30998/joti.v3i1.9287
F. D. Mayangsari, H. Adianto, and Y. Yuniati, “Usulan Pengendalian Kualitas Produk Isolator Dengan Metode Failure Mode and Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta),” J. Online Inst. Teknol. Nas., vol. 03, no. 2, pp. 81–91, 2015.
Sepriandini, F., & Ngatilah, Y. (2021). Analisis Kualitas Produk Koran Menggunakan Metode Six Sigma Dan Failure Mode and Effect Analysis (Fmea) Di Pt. Xyz Balikpapan. Tekmapro : Journal of Industrial Engineering and Management, 16(2), 48–59. https://doi.org/10.33005/tekmapro.v16i2.203
R. Kaban, “Pengendalian Kualitas Kemasan Plastik Pouch Menggunakan Statistical Procces Control (SPC) di PT Incasi Raya Padang,” J. Optimasi Sist. Ind., vol. 13, no. 1, p. 518, Apr. 2016, doi: 10.25077/josi.v13.n1.p518-547.2014.
A. Hardiyanti, A. Mawadati, & A. H. Wibowo, “Analisis Pengendalian Kualitas Proses Penyamakan Kulit Menggunakan Metode Statistical Process Control (SPC),” IEJST Vol. 5 No. 1 (2021) Hal. 41-47, 2021.
Nugroho, A. J. (2007) “Usulan Perbaikan Gangguan Fixed Telephone Dan Telkom Flexi Dengan Kombinasi Metode Fault Tree Analysis Dan Failure Mode And Effect Analysis Di Wilayah Divre Iv Kandatel Solo (Pt. Telekomunikasi Indonesia.Tbk)”.122-134.
.png)
