ANALISIS EFEKTIVITAS KINERJA MESIN PRINTING SM-52 UNTUK PRODUK BUKU TAHUNAN Studi Kasus : CV RENJANA OFFSET
DOI:
https://doi.org/10.51903/juritek.v3i3.2071Keywords:
Overall Equipment Effectiveness, Breakdown , Total Produktive MaintenanceAbstract
Tujuan penelitian ini guna menganalisis efektivitas mesin dan memberi usulan perbaikan losses pada mesin SM-52, selama 6 bulan terjadi breakdown selama 17,5 jam. Overall Equipment Effectiveness digunakan untuk mengukur Total Productive Maintenance (TPM) . Nilai Availability Rate dan Quality Rate sudah memenuhi standar, sedangkan rata - rata Performance Rate belum memenuhi standar. Hasil perhitungan Overall Equipment Effectiveness sebesar 94,54% sudah memenuhi standar World Class OEE. Penyebab nilai rendah adalah Set Up And Adjustment Losses sebesar 30%. Perusahaan dapat menjalankan pemeliharaan terencana, pememliharaan berkelanjutan, dan pemeliharaan kualitas.
References
Bakti, C., & Kartika, H. (2019). Perawatan Mesin Dengan Metode Overall Equipment Effectiveness
( Oee ). Jurnal Ilmu Teknik Dan Komputer, 3(1), 31–38.
Huang, S. H., Dismukes, J. P., Shi, J., Su, Q., Razzak, M. A., Bodhale, B., Robinson, D. E. (2003) Manufacturing productivity improvement using effectiveness metrics and simulation analysis. International Journal of Production Research, 41(3), 513-527
Indriawanti, V., & Bernik, M. (2020). Analisis Penerapan Total Productive Maintanance (TPM) dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) pada Mesin Printing. Jurnal Teknik Industri, 10(1), 42–52.
Nakajima, Seiichi. (1988). Introduction to Total Productive Maintenance, 1ST Edition, Productivity Inc, Cambridge.
Nayak, E. A. (2013) Evaluation of OEE in a continuous process industry on an insulation line in a cable manufacturing unit. International Journal of Innovative Research in Science, Engineering and Technology, 2(5).
Prabowo, H. A., Suprapto, Y. B., & Farida, F. (2018). the Evaluation of Eight Pillars Total Productive Maintenance (Tpm) Implementation and Their Impact on Overall Equipment Effectiveness (Oee) and Waste. Sinergi, 22(1), 13-17.
Sembiring, N., Elvira, G. A., Murnawan, H., Mustofa, Kusnadi, B. E., Ienaco, S. N., Pascasarjana, P., Its, K., Laboratorium, S., Teknik, J., Perkapalan, S., Pola, A., Sistem, M. D., Setyadi, I., Djamal, N., Azizi, R., Rinawati, D. I., & Dewi, N. C. (2014). Analisis Penerapan Total Productive Maintenance (TPM) Menggunakan Overall Equipment Effectiveness (OEE) dan Six Big Losses pada Mesin Cavitec di PT. Essentra Surabaya. Prosiding Seminar Nasional Teknologi Dan Informatika, Volume 11(1), 21–26.
Singh, M., & Narwal, M. S. (2017) Measurement of overall equipment efficiency (OEE) of a manufacturing industry: An effective lean tool. International Journal of Recent Trends in Engineering and Research, 3(5), 268-275.
Waqas, M. (2013) Measuring performance of mining equipment used in cement industry by using overall equipment effectiveness (OEE) (Doctoral dissertation, MSc. Thesis, Department of Mining Engineering, University of Engineering & Technology, Lahore, Pakistan).
Wahid, A. (2020). Penerapan Total Productive Maintenance (TPM) Produksi Dengan Metode Overall Equipment Effectiveness (OEE) Pada Proses Produksi Botol (PT. XY Pandaan – Pasuruan). Jurnal Teknologi Dan Manajemen Industri, 6(1), 12–16.
( Oee ). Jurnal Ilmu Teknik Dan Komputer, 3(1), 31–38.
Huang, S. H., Dismukes, J. P., Shi, J., Su, Q., Razzak, M. A., Bodhale, B., Robinson, D. E. (2003) Manufacturing productivity improvement using effectiveness metrics and simulation analysis. International Journal of Production Research, 41(3), 513-527
Indriawanti, V., & Bernik, M. (2020). Analisis Penerapan Total Productive Maintanance (TPM) dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) pada Mesin Printing. Jurnal Teknik Industri, 10(1), 42–52.
Nakajima, Seiichi. (1988). Introduction to Total Productive Maintenance, 1ST Edition, Productivity Inc, Cambridge.
Nayak, E. A. (2013) Evaluation of OEE in a continuous process industry on an insulation line in a cable manufacturing unit. International Journal of Innovative Research in Science, Engineering and Technology, 2(5).
Prabowo, H. A., Suprapto, Y. B., & Farida, F. (2018). the Evaluation of Eight Pillars Total Productive Maintenance (Tpm) Implementation and Their Impact on Overall Equipment Effectiveness (Oee) and Waste. Sinergi, 22(1), 13-17.
Sembiring, N., Elvira, G. A., Murnawan, H., Mustofa, Kusnadi, B. E., Ienaco, S. N., Pascasarjana, P., Its, K., Laboratorium, S., Teknik, J., Perkapalan, S., Pola, A., Sistem, M. D., Setyadi, I., Djamal, N., Azizi, R., Rinawati, D. I., & Dewi, N. C. (2014). Analisis Penerapan Total Productive Maintenance (TPM) Menggunakan Overall Equipment Effectiveness (OEE) dan Six Big Losses pada Mesin Cavitec di PT. Essentra Surabaya. Prosiding Seminar Nasional Teknologi Dan Informatika, Volume 11(1), 21–26.
Singh, M., & Narwal, M. S. (2017) Measurement of overall equipment efficiency (OEE) of a manufacturing industry: An effective lean tool. International Journal of Recent Trends in Engineering and Research, 3(5), 268-275.
Waqas, M. (2013) Measuring performance of mining equipment used in cement industry by using overall equipment effectiveness (OEE) (Doctoral dissertation, MSc. Thesis, Department of Mining Engineering, University of Engineering & Technology, Lahore, Pakistan).
Wahid, A. (2020). Penerapan Total Productive Maintenance (TPM) Produksi Dengan Metode Overall Equipment Effectiveness (OEE) Pada Proses Produksi Botol (PT. XY Pandaan – Pasuruan). Jurnal Teknologi Dan Manajemen Industri, 6(1), 12–16.
Downloads
Published
2023-11-25
How to Cite
Dwi Dasa Candra. (2023). ANALISIS EFEKTIVITAS KINERJA MESIN PRINTING SM-52 UNTUK PRODUK BUKU TAHUNAN Studi Kasus : CV RENJANA OFFSET. Jurnal Ilmiah Teknik Mesin, Elektro Dan Komputer, 3(3), 404–416. https://doi.org/10.51903/juritek.v3i3.2071
Issue
Section
Articles
.png)
