ANALISA HASIL PERFORMA PENGERINGAN PADA MESIN PENGASAP DAGING IKAN DENGAN SISTEM TERTUTUP
DOI:
https://doi.org/10.51903/juritek.v2i1.418Keywords:
drying, fish meat, efficiency, moisture contentAbstract
Research has been carried out on analyzing the results of drying performance on fish meat drying machines with a closed system which aims to determine the level of water content reduction in fish meat after the smoking process. In the design of the fish meat smoking machine, testing is carried out at a temperature of 50oC to 70oC to calculate heat, thermal efficiency, moisture content, and smoking time. So with this machine, the smoking process will be more hygienic and efficient than conventional smoking. The results of calculations and discussions show that the rate of heat energy entering the smoking rack is 996 watts, and the rate of heat energy of vaporization is 154.71 watts. Thermal efficiency is obtained from the ratio of heat energy and heat energy rate of vaporization of 15.53%. From the experimental results, the final water content of grouper fish was 46.67%, baronang fish 45%, tuna fish 50%, and lemuru fish 40%.
References
[2] A. Hadi, “Analisis Data Hasil Penangkapan Ikan di Unit Pelaksana Teknis Pelabuhan Perikanan Pantai Muncar,” J. Lemuru, vol. 2, no. 1, pp. 1–5, 2020.
[3] N. Adharani, S. Sulistiono, and F. I. Yusuf, “Pengembangan Pemberdayaan Wanita Nelayan Muncar Banyuwangi Melalui Pengembangan Model Eko-Koefisiensi,” JATI EMAS (Jurnal Apl. Tek. dan Pengabdi. Masyarakat), vol. 5, no. 1, pp. 1–6, 2021.
[4] A. Aswan, M. R. Putra, M. K. Tama, and R. Meilani, “Pengaruh Waktu dan Kecepatan Aliran Udara Terhadap Kadar Air Pada Proses Pengasapan Ikan Dengan Sistem Sirkulasi Asap Bebas Tar,” KINETIKA, vol. 9, no. 1, pp. 15–19, 2018.
[5] A. Afandi, N. Lusi, M. Hilmi, D. P. Diansah, and A. Hartanto, “PKM Teknologi Mesin Pengasap bagi Pengusaha Ikan Asap Dusun Palodem Desa Tembokrejo Muncar Banyuwangi,” J. Pemberdaya. Publ. Has. Pengabdi. Kpd. Masy., vol. 3, no. 3, pp. 395–400, 2019.
[6] Darianto, Sitohang H. T. S., and Amrinsyah, “Analisa Faktor-Faktor yang Mempengaruhi Proses Pengasapan Pada Mesin Pengasapan Ikan Lele,” J. Mech. Eng. Manuf. Mater. Energy, vol. 2, no. 2, pp. 56–66, 2018.
[7] J. Sirait and S. H. Saputra, “Teknologi Alat Pengasapan Ikan dan Mutu Ikan Asap,” J. Ris. Teknol. Ind., vol. 14, no. 2, pp. 220–229, 2020.
[8] H. Harlina, “Pkm Kelompok Nelayan Pengolah Ikan Pari Asap di Kabupaten Jeneponto,” Jati Emas (Jurnal Apl. Tek. dan Pengabdi. Masyarakat), vol. 1, no. 2, pp. 38–48, 2017.
[9] F. Bimantara, A. Supriadi, and S. Hanggita, “Modifikasi dan Pengujian Alat Pengasapan Ikan Sistem Kabinet,” J. FishtecH, vol. 4, no. 1, pp. 46–56, 2015.
[10] I. Catrawedarma, A. Jefri, and K. R. Anang, “Pengujian Thermal Alat Pengering Padi dengan Konsep Natural Convection,” PROSIDING, vol. 1, no. 6, pp. 406–415, 2017.
.png)
