USULAN PERBAIKAN KECELAKAAN KERJA PADA PROSES PENCETAKAN PT MEGA JAYA LOGAM MENGGUNAKAN JSA DAN FTA
DOI:
https://doi.org/10.51903/juritek.v3i2.1900Kata Kunci:
Kecelakaan Kerja, Pengecoran Logam, Job Safety Analysis, Fault Tree AnalysisAbstrak
PT. Mega Jaya Logam merupakan salah satu industri manufaktur yang berfokus pada bidang industri pengecoran logam dan permesinan. Produk-produk yang dihasilkan pada industri ini antara lain berupa kursi taman antik, manhole cover, tiang lampu antik, grill tangkapan air, dan masih banyak lagi. Dalam proses pembuatan produknya, PT. Mega Jaya Logam menggunakan mesin tanur induksi untuk meleburkan logam yang kemudian akan diikuti tahapan penuangan logam panas dalam cetakan. Pada bagian pencetakan pernah didapati kecelakaan kerja yang dimana kecelakaan ini lebih tinggi dari beberapa departemen yang ada pada PT. Mega Jaya Logam seperti terkena serpihan logam & terkena percikan logam panas yang berdampak terhadap para pekerja. Tujuan dari penelitian ini untuk mengetahui faktor penyebab kecelakaan serta mencari potensi dan risiko yang didapat menggunakan metode Job Safety Analysis (JSA) lalu menganalisis serta mencocokkan potensi bahaya yang didapat dengan beberapa faktor yang membuat para pekerja mendapati kecelakaan kerja yang dicari menggunakan Fault Tree Analysis (FTA) yang kemudian diberikan usulan bagaimana upaya pengendalian dengan metode agar meminimalisir kecelakaan kerja di masa mendatang.
Referensi
[1] M. Yusuf, T. I. Oesman dan N. A. Wicaksono, “Pemberdayaan Karyawan Dalam Penerapan Keselamatan dan Kesehatan Kerja Berbasis Fault Tree Analysis,” Jurnal Ergonomi Indonesia (The Indonesian Journal of Ergonomic), 2020.
[2] F. A. Prihany, “Kajian Risiko Kesehatan dan Keselamatan Kerja dengan Metode Job Safety Analysis,” Jurnal Penelitian Kesehatan Suara Forikes Volume 13 No. 3, pp. 2502-7778, 2022.
[3] S. Bahri, F. S. M. Jalil, A. Amri dan M. Ilham, “Sterilizer Reliability Analysis Using Reliability Block Diagram Based on Failure Identification Through Fault Tree Analysis,” International Journal of Engineering, Science & InformationTechnology (IJESTY), pp. 38-44, 2022.
[4] A. K. Mishra dan P. Aithal, “Job Safety Analysis during Tunnel Construction,” 2021.
[5] M. Palega, “Application of the Job Safety Analysis (JSA) Method to Assessment Occupational Risk at the Workplace of the Laser Cutter Operator,” Management and Production Engineering Volume 12 No. 3, pp. 40-50, 2021.
[6] J. Mahaboon, S. Yimthiang, D. Waeyeng dan S. Darnkachatarn, “Hazard Identification and Job Safety Analysis for Improving Occupational Health and Safety in Fishing Net Sinking Process in Southern Thailand,” International Journal of Integrated Engineering Volume 14 No. 4, pp. 201-211, 2022.
[7] B. Jafari, Z. A. Nezamodini, H. Sari dan S. Hesam, “Risk Assessment by Job Safety Analysis and William Fine Method and Comparison with Workers' Risk Perception Results,” Archives of Occupational Health Volume 5 No. 4, pp. 17-1109, 2021.
[8] T. Bakeli dan A. A. Hafidi, “A Fault Tree Analysis (FTA) Based Approach for Construction Projects Safety Risk Management,” 2020.
[9] A. R. Sandito, D. N. Rahma dan N. U. Tyastuti, “Supply Chain Risk Management in Newspaper Printing Using FMEA and FTA Methods: A Case Study,” 2022.
[10] K. Qian, L. Yu dan S. Gao, “Fault Tree Construction Model Based on Association Analysis for Railway Overhead Contact Syste,” International Journal of Computational Intelligence Systems, pp. 96-105, 2021.
[11] S. Liu dan X. Zhang, “Fault Diagnosis and Maintenance Countermeasures of Transverse Drainage Pipe in Subway Tunnel Based on Fault Tree Analysis,” International Journal of Environmental Research and Public Health, 2022.
[12] S. Rahmadanty, M. Apriani dan I. P. A. Wibawa, “Probability Analysis of Human Error in The Fiberglass Pipe Installation Process with Spar-H And FTA Methods at PT. GFRP,” International Journal of Innovative Science and Research Technology, 2022.
[13] R. S. Masykur dan A. Oktora, “Quality Improvement on Optical Fiber Coloring Process using Fault Tree Analysis and Failure Mode and Effect Analysis,” International Journal of Engineering Research and Advanced Technology (IJERAT), 2021.
[14] R. J. Guerin dan M. D. Toland, “An application of a modified theory of planned behavior model to investigate adolescents’ job safety knowledge, norms, attitude and intention to enact workplace safety and health skills,” 2020.
[15] O. A. Umoren, J. M. Inim dan F. O. Umoren, “Justice perception and job safety as predictors of work-efficacy among media workers in Uyo,” 2021.
[16] E. Badoozadeh, M. F. Arefi dan A. Babaei-Pouya, “Job Safety Risk Assessment in the Printing Industry using Job Safety Analysis method and offering control recommendations,” PJMHS Volume 14 No. 4, pp. 1785-1789, 2020.
[17] E. Mulyaningsih, “Analysis of the Safety Risks of Working With Job Safety Analysis On the Installation of Scaffolding at PT. Jaya Konstruksi Jakarta,” International Journal of Science, Technology & Management, pp. 2722-4015, 2020.
[18] N. F. Fatma dan D. E. Mustafa Putra, “Usulan Perbaikan Pada Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja Di PT. Surya Toto Indonesia Tbk Divisi Sanitary Dengan Metode HIRA Dan FTA,” Journal Industrial Manufacturing, pp. 27-42, 2021.
[19] M. Z. Ikhsan, “Identifikasi Bahaya, Risiko Kecelakaan Kerja Dan Usulan Perbaikan Menggunakan Metode Job Safety Analysis (JSA) (Studi Kasus: PT. Tamora Agro Lestari),” Jurnal Teknologi dan Manajemen Industri Terapan Volume 10, pp. 42-52, 2022.
[20] R. F. Daulay dan M. Nuruddin, “ANALISIS K3 DI BENGKEL DWI JAYA MOTOR DENGAN MENGGUNAKAN METODE HIRA TERINTEGRASI METODE FTA,” JUSTI (Jurnal Sistem Dan Teknik Industri), 2021.
[21] R. dan H. , “Analisis Keselamatan Dan Kesehatan Kerja Di Pekerjaan Fabrikasi Dengan Menggunakan Metode HIRA Dan FTA (Studi Kasus : CV Karya Manunggal Teknik),” JUSTI (Jurnal Sistem Dan Teknik Industri), 2022.
[2] F. A. Prihany, “Kajian Risiko Kesehatan dan Keselamatan Kerja dengan Metode Job Safety Analysis,” Jurnal Penelitian Kesehatan Suara Forikes Volume 13 No. 3, pp. 2502-7778, 2022.
[3] S. Bahri, F. S. M. Jalil, A. Amri dan M. Ilham, “Sterilizer Reliability Analysis Using Reliability Block Diagram Based on Failure Identification Through Fault Tree Analysis,” International Journal of Engineering, Science & InformationTechnology (IJESTY), pp. 38-44, 2022.
[4] A. K. Mishra dan P. Aithal, “Job Safety Analysis during Tunnel Construction,” 2021.
[5] M. Palega, “Application of the Job Safety Analysis (JSA) Method to Assessment Occupational Risk at the Workplace of the Laser Cutter Operator,” Management and Production Engineering Volume 12 No. 3, pp. 40-50, 2021.
[6] J. Mahaboon, S. Yimthiang, D. Waeyeng dan S. Darnkachatarn, “Hazard Identification and Job Safety Analysis for Improving Occupational Health and Safety in Fishing Net Sinking Process in Southern Thailand,” International Journal of Integrated Engineering Volume 14 No. 4, pp. 201-211, 2022.
[7] B. Jafari, Z. A. Nezamodini, H. Sari dan S. Hesam, “Risk Assessment by Job Safety Analysis and William Fine Method and Comparison with Workers' Risk Perception Results,” Archives of Occupational Health Volume 5 No. 4, pp. 17-1109, 2021.
[8] T. Bakeli dan A. A. Hafidi, “A Fault Tree Analysis (FTA) Based Approach for Construction Projects Safety Risk Management,” 2020.
[9] A. R. Sandito, D. N. Rahma dan N. U. Tyastuti, “Supply Chain Risk Management in Newspaper Printing Using FMEA and FTA Methods: A Case Study,” 2022.
[10] K. Qian, L. Yu dan S. Gao, “Fault Tree Construction Model Based on Association Analysis for Railway Overhead Contact Syste,” International Journal of Computational Intelligence Systems, pp. 96-105, 2021.
[11] S. Liu dan X. Zhang, “Fault Diagnosis and Maintenance Countermeasures of Transverse Drainage Pipe in Subway Tunnel Based on Fault Tree Analysis,” International Journal of Environmental Research and Public Health, 2022.
[12] S. Rahmadanty, M. Apriani dan I. P. A. Wibawa, “Probability Analysis of Human Error in The Fiberglass Pipe Installation Process with Spar-H And FTA Methods at PT. GFRP,” International Journal of Innovative Science and Research Technology, 2022.
[13] R. S. Masykur dan A. Oktora, “Quality Improvement on Optical Fiber Coloring Process using Fault Tree Analysis and Failure Mode and Effect Analysis,” International Journal of Engineering Research and Advanced Technology (IJERAT), 2021.
[14] R. J. Guerin dan M. D. Toland, “An application of a modified theory of planned behavior model to investigate adolescents’ job safety knowledge, norms, attitude and intention to enact workplace safety and health skills,” 2020.
[15] O. A. Umoren, J. M. Inim dan F. O. Umoren, “Justice perception and job safety as predictors of work-efficacy among media workers in Uyo,” 2021.
[16] E. Badoozadeh, M. F. Arefi dan A. Babaei-Pouya, “Job Safety Risk Assessment in the Printing Industry using Job Safety Analysis method and offering control recommendations,” PJMHS Volume 14 No. 4, pp. 1785-1789, 2020.
[17] E. Mulyaningsih, “Analysis of the Safety Risks of Working With Job Safety Analysis On the Installation of Scaffolding at PT. Jaya Konstruksi Jakarta,” International Journal of Science, Technology & Management, pp. 2722-4015, 2020.
[18] N. F. Fatma dan D. E. Mustafa Putra, “Usulan Perbaikan Pada Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja Di PT. Surya Toto Indonesia Tbk Divisi Sanitary Dengan Metode HIRA Dan FTA,” Journal Industrial Manufacturing, pp. 27-42, 2021.
[19] M. Z. Ikhsan, “Identifikasi Bahaya, Risiko Kecelakaan Kerja Dan Usulan Perbaikan Menggunakan Metode Job Safety Analysis (JSA) (Studi Kasus: PT. Tamora Agro Lestari),” Jurnal Teknologi dan Manajemen Industri Terapan Volume 10, pp. 42-52, 2022.
[20] R. F. Daulay dan M. Nuruddin, “ANALISIS K3 DI BENGKEL DWI JAYA MOTOR DENGAN MENGGUNAKAN METODE HIRA TERINTEGRASI METODE FTA,” JUSTI (Jurnal Sistem Dan Teknik Industri), 2021.
[21] R. dan H. , “Analisis Keselamatan Dan Kesehatan Kerja Di Pekerjaan Fabrikasi Dengan Menggunakan Metode HIRA Dan FTA (Studi Kasus : CV Karya Manunggal Teknik),” JUSTI (Jurnal Sistem Dan Teknik Industri), 2022.
Unduhan
Diterbitkan
2023-07-30
Cara Mengutip
Pulung Akbar Mukti Mulyojati, & Ferida Yuamita. (2023). USULAN PERBAIKAN KECELAKAAN KERJA PADA PROSES PENCETAKAN PT MEGA JAYA LOGAM MENGGUNAKAN JSA DAN FTA. Jurnal Ilmiah Teknik Mesin, Elektro Dan Komputer, 3(2), 360–374. https://doi.org/10.51903/juritek.v3i2.1900
Terbitan
Bagian
Articles
.png)
