Analisis Rasio Profitabilitas Dan Rasio Aktivitas Sebagai Dasar Penilaian Kinerja Keuangan PT. Sepatu Bata Tbk

Authors

  • Indah Ivanka Universitas Islam Negeri Sumatera Utara
  • Muhammad Yafiz Universitas Islam Negeri Sumatera Utara
  • Arnida Wahyuni Lubis Universitas Islam Negeri Sumatera Utara

DOI:

https://doi.org/10.55606/jumia.v2i3.3225

Keywords:

Financial Performance, Profitability Ratios, Activity Ratios

Abstract

PT Shoes Bata Tbk is a company engaged in the manufacture of leather shoes, canvas shoes, casual and sports shoes, injection/slop sandals and industrial footwear safety mats. Financial performance is a description of the financial condition of a company which is analyzed using financial analysis tools, usually the measure used is the ratio. Research conducted by the author to analyze the financial performance of PT Shoes Bata Tbk based on profitability ratios and activity ratios. The profitability ratio can be measured by Gross Profit Margin, Net Profit Margin, and Return on Investment. Where Gross Profit Margin and Net Profit Margin are ratios that measure the company's ability to earn profits on sales, Return on Investment is a ratio that measures the company's ability to use all assets owned to generate profits after tax. The activity ratio can be measured by Receivable Turnover, which is a ratio that measures the company's ability to quickly manage the level of accounts receivable turnover. Inventory Turnover is a ratio that shows how quickly inventory turns over in sales activities. And Total Asset Turnover is a ratio that measures a company's ability to create sales using all the assets it owns. The aim of this research is to find out and analyze the financial performance of PT SEPATU BATA Tbk during 2016-2021 based on the two ratios. This research uses a descriptive qualitative approach method. The data source used is secondary data in the form of profit/loss financial report data and balance sheet reports. The results of this research indicate that the financial performance of PT Shoes Bata Tbk for the 2016-2021 period based on GPM is considered very good because the company was able to reduce the cost of goods sold, resulting in high sales and high gross profit. NPM is considered not good because the net profit generated is less with quite high sales. ROI is considered very poor because the high total assets are not commensurate with the net profit generated. RT is considered very good because it increases every year. IT is considered very poor due to the decrease in cost of goods sold and increase in average inventory each year. TAT is considered quite good because the company is able to manage its assets well. Financial performance as measured by the profitability ratio and activity ratio can be said to be less efficient, because the components of the profitability ratio and activity ratio are still low and do not reach good company standards.

References

Academy, B. (2023). Prototype: Pengertian, tujuan, dan manfaatnya. Binar Academy. Retrieved from https://www.binaracademy.com/blog/pengertian-prototype-dan-tujuannya (Accessed 10 December 2023).

AJI, I. P. (2023). Analisis pelaksanaan uji beban crane terhadap kelancaran proses bongkar muat batu bara di MV Habco Polaris. Politeknik Ilmu Pelayaran Semarang. (Accessed 7 October 2023).

Argyanti, Z. (2022). Analisis sistem pengendali kapasitas beban muatan truk berbasis teknologi internet. Ocean Engineering: Jurnal Ilmu Teknik Dan Teknologi Maritim, 1(3), 74–84. (Accessed 10 December 2023).

Bado, B. (2022). Model pendekatan kualitatif: Telaah dalam metode penelitian ilmiah (Cet. 1). Tahta Media Grup. (Accessed 1 April 2024).

Component 101. (2021). MT3608 - 2A DC-DC Step Up (Boost) Power Module. Retrieved from https://components101.com/modules/mt3608-2a-dc-dc-step-up-power-module (Accessed 12 April 2024).

Effendi, R., Ali, S., & Usmardi, U. (2020). Kendali senapan menggunakan joystick berbasis mikrokontroller ATmega32 dengan modul NRF24L01. Jurnal Litek: Jurnal Listrik Telekomunikasi Elektronika, 17(2), 61–68. (Accessed 9 November 2023).

Fatoni, A., Nugroho, D. D., & Irawan, A. (2015). Rancang bangun alat pembelajaran microcontroller berbasis ATmega 328 di Universitas Serang Raya. PROSISKO: Jurnal Pengembangan Riset Dan Observasi Sistem Komputer, 2(1). (Accessed 9 November 2023).

Fitria, Y. (2018). Prototipe sistem buka tutup Bascule Bridge otomatis untuk perlintasan kapal berbasis Arduino Mega. (Accessed 10 December 2023).

Ishaq, I., Azhar, A., & Muhaimin, M. (2019). Rancang bangun neraca elektronik menggunakan sensor load cell pada mesin penggiling kunyit kering. Jurnal TEKTRO, 3(1). (Accessed 10 December 2023).

Mardani, R., & Melda, A. (2023). Sistem informasi manajemen prestasi mahasiswa pada prodi sistem informasi berbasis web [Institut Informatika dan Bisnis]. Retrieved from http://repo.darmajaya.ac.id/14328/ (Accessed 8 November 2023).

Nizam, M. N., Yuana, H., & Wulansari, Z. (2022). Mikrokontroler ESP 32 sebagai alat monitoring pintu berbasis web. JATI (Jurnal Mahasiswa Teknik Informatika, 6(2), 767–772. (Accessed 10 December 2023).

Noor, Z. Z., Putra, I. G. A. A. S., Saputra, K. O., & Wirastuti, N. D. (2022). Rancang bangun prototipe monitoring pengairan sawah berbasis Lora Ra-02 Sx1278. Jurnal SPEKTRUM, 9(3). (Accessed 10 December 2023).

PT. Karya Setia Jaya. (2023). Hidrolik crane: Pengertian, jenis-jenis dan fungsinya. Retrieved from https://ksj.co.id/hidrolik-crane-pengertian-jenis-jenis-dan-fungsinya/

Ramadhan, M. F. (2022). Alat penghitung otomatis keluar dan masuknya barang beserta peringatan jika melebihi maksimal penyimpanannya. Journal of Syntax Literate, 7(7). (Accessed 15 May 2024).

Randi, B. S. (2018). Teori penelitian terdahulu. Erlangga. (Accessed 7 October 2023).

Robinson, R., Zulnasri, Z., Effendi, E., & Sihotang, W. S. (2020). Analisis kerusakan deck crane pada saat proses bongkar muat di kapal MV. Ch Bella.

Rohim, M. Z., Wijayanti, E., & Murti, A. C. (2021). Design of overloading detection systems on vehicles using Arduino. Journal of Physics: Conference Series, 1943(1), 12022. (Accessed 15 May 2024).

Sutarti, T., & Irawan, E. (2017). Kiat sukses meraih hibah penelitian pengembangan. Deepublish. (Accessed 15 May 2024).

Wagyana, A. (2019). Prototipe modul praktik untuk pengembangan aplikasi Internet of Things (IoT). Setrum: Sistem Kendali-Tenaga-Elektronika-Telekomunikasi-Komputer, 8(2), 238–247. https://doi.org/10.36055/setrum.v8i2.6561 (Accessed 17 December 2023).

Published

2024-07-25

How to Cite

Indah Ivanka, Muhammad Yafiz, & Arnida Wahyuni Lubis. (2024). Analisis Rasio Profitabilitas Dan Rasio Aktivitas Sebagai Dasar Penilaian Kinerja Keuangan PT. Sepatu Bata Tbk . Jurnal Mutiara Ilmu Akuntansi, 2(3), 233=248. https://doi.org/10.55606/jumia.v2i3.3225